Regulatory compliance in food packaging is not optional — non-compliance leads to market recalls, export bans and significant financial penalties. This guide outlines the key hygiene standards thermoform packaging operations must meet.
HACCP in Packaging Operations
Hazard Analysis Critical Control Points (HACCP) requires identifying potential contamination points in the packaging process. For thermoforming, critical control points include: film handling, gas injection accuracy, seal integrity testing and cross-contamination prevention between products.
Food Contact Material Regulations
- EU: Regulation (EC) No 1935/2004 and Regulation (EU) No 10/2011 for plastics
- USA: FDA 21 CFR for food contact substances
- Turkey: Türk Gıda Kodeksi, Ambalaj Yönetmeliği
- GCC: GSO standards aligned with Codex Alimentarius
Machine Hygiene Requirements
AISI 304 stainless steel is the minimum standard for food contact surfaces. AISI 316L is required where direct product contact with liquids occurs. All Pipak Makina machines use food-grade materials and are designed for CIP (Clean-In-Place) compatibility.
Seal Integrity Testing
Every thermoform line must include a seal integrity testing protocol. Methods include bubble emission testing, dye penetration testing and headspace gas analysis. Frequency and method should be defined in your HACCP plan.
Frequently Asked Questions
Is ISO 22000 required for thermoform packaging operations?
ISO 22000 is not legally mandatory in most markets, but it is increasingly required by major retailers and export buyers as a prerequisite for supplier approval.
How often should seal integrity testing be performed?
At minimum, at the start of each production run and after any machine adjustment. High-volume operations test every 30-60 minutes of continuous production.